ITCertKing Microsoft 070-503-Csharp exam practice questions and answers

Some sites provide Microsoft 070-503-Csharp exam study materials on the Internet , but they do not have any reliable guarantee. Let me be clear here a core value problem of ITCertKing . All Microsoft exams are very important. In this era of rapid development of information technology, ITCertKing just questions provided by one of them. Why do most people choose ITCertKing? This is because the exam information provided by ITCertKing will certainly be able to help you pass the exam. Why? Because it provides the most up-to-date information, which is the majority of candidates proved by practice.

The community has a lot of talent, people constantly improve their own knowledge to reach a higher level. But the country's demand for high-end IT staff is still expanding, internationally as well. So many people want to pass Microsoft 070-503-Csharp certification exam. But it is not easy to pass the exam. However, in fact, as long as you choose a good training materials to pass the exam is not impossible. We ITCertKing Microsoft 070-503-Csharp exam training materials in full possession of the ability to help you through the certification. ITCertKing website training materials are proved by many candidates, and has been far ahead in the international arena. . If you want to through Microsoft 070-503-Csharp certification exam, add the ITCertKing Microsoft 070-503-Csharp exam training to Shopping Cart quickly!

The trouble can test a person's character. A bad situation can show special integrity. When to face of a difficult time, only the bravest people could take it easy. Are you a brave person? If you did not do the best preparation for your IT certification exam, can you take it easy? Yes, of course. Because you have ITCertKing's Microsoft 070-503-Csharp exam training materials. As long as you have it, any examination do not will knock you down.

ITCertKing is the leader in the latest Microsoft 070-503-Csharp exam certification and exam preparation provider. Our resources are constantly being revised and updated, with a close correlation. If you prepare Microsoft 070-503-Csharp certification, you will want to begin your training, so as to guarantee to pass your exam. As most of our exam questions are updated monthly, you will get the best resources with market-fresh quality and reliability assurance.

Don't need a lot of time and money, only 30 hours of special training, and you can easily pass your first time to attend Microsoft certification 070-503-Csharp exam. ITCertKing are able to provide you with test exercises which are closely similar with real exam questions.

Exam Code: 070-503-Csharp
Exam Name: Microsoft (TS: MS.NET Frmwrk 3.5, Wndws Commun Fndtion App Dev)
One year free update, No help, Full refund!
Total Q&A: 75 Questions and Answers
Last Update: 2013-09-19

According to the research of the past exams and answers, ITCertKing provide you the latest Microsoft 070-503-Csharp exercises and answers, which have have a very close similarity with real exam. ITCertKing can promise that you can 100% pass your first time to attend Microsoft certification 070-503-Csharp exam.

ITCertKing has gained the reputation of the many certification industry, because we have a lot of high-quality Microsoft 070-503-Csharp Exam 070-503-Csharp study guide, 070-503-Csharp exam, 070-503-Csharp exam answer. As the most professional supplier on the site of IT certification test currently , we provide a comprehensive after-sales service. We provide tracking services to all customers. Within one year of your purchase, enjoy free upgrades examination questions service. During this period, if Microsoft's 070-503-Csharp test questions are modified, We will be free to provide customers with protection. Microsoft 070-503-Csharp certification exam is carefully crafted by our ITCertKing IT experts. With the ITCertKing of Microsoft 070-503-Csharp exam materials, I believe that your tomorrow will be better.

070-503-Csharp Free Demo Download: http://www.itcertking.com/070-503-Csharp_exam.html

NO.1 5. You have successfully created two interfaces: IMyService and IMyServiceClient.
You need to ensure that the service is able to call methods from the client application by using the
IMyServiceClient interface.
Which code segment should you use?
A. [ServiceContract(CallbackContract=typeof(IMyServiceClient))]
public interface IMyService
{
...
}
public interface IMyServiceClient
{
...
}
B. [ServiceContract(CallbackContract=typeof(IMyService))]
public interface IMyService
{
...
}
public interface IMyServiceClient
{
...
}
C. [ServiceContract(SessionMode=SessionMode.Allowed)]
[ServiceKnownType(typeof(IMyServiceClient))]
public interface IMyService : IMyServiceClient
{
...
}
public interface IMyServiceClient
{
...
}
D. [ServiceContract]
[ServiceKnownType(typeof(IMyServiceClient))]
public interface IMyService
{
...
}
[ServiceContract]
public interface IMyServiceClient : ICommunicationObject
{
...
}
Answer: A

Microsoft demo   070-503-Csharp   070-503-Csharp test questions   070-503-Csharp braindump   070-503-Csharp test
3. You have created a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The existing service interface is named IMyService, and contains the following code segment.
[ServiceContract(Name="SvcOrder", Namespace="http://contoso.com/services")]
public interface IMyService
{
[OperationContract]
void DoSomething();
}
You create a new service named IMyServiceV1 that contains an operation named DoSomethingElse.
You need to ensure that existing client applications are still able to access the IMyService.DoSomething
method without modifying client code.
Which code segment should you use?
A. [ServiceContract(Namespace="http:?//contoso.com/services/V1")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
B. [ServiceContract(Name="SvcOrder")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
C. [ServiceContract(Name="SvcOrderV1",
Namespace="http: //contoso.com/services")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
D. [ServiceContract(Name="SvcOrder",
Namespace="http: //contoso.com/services")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
Answer: D

Microsoft certification   070-503-Csharp test answers   070-503-Csharp   070-503-Csharp answers real questions   070-503-Csharp

NO.2 When you browse to the base address of the service, you receive the following message: "Metadata
publishing for this service is currently disabled."
You debug the code and discover that the ServiceMetadataBehavior behavior was previously nonexistent.
You need to enable metadata publishing.
What should you do?
A. Delete lines 15 and 16.
B. Modify the code segment at line 03 in the following manner.
Uri mexAddress=new Uri("/service");
C. Insert the following code segment at line 11.
smb.HttpGetEnabled=true;
D. Insert the following code segment at line 19.
smb.HttpGetEnabled=true;
Answer: D

Microsoft   070-503-Csharp exam simulations   070-503-Csharp   070-503-Csharp questions   070-503-Csharp
17. You are creating an endpoint for a Windows Communication Foundation service by using
Microsoft .NET Framework 3.5. You create the endpoint by using a custom binding.
You write the following code segment.
BasicHttpBinding binding=new BasicHttpBinding();
binding.Security.Message.ClientCredentialType=
?BasicHttpMessageCredentialType.Certificate;
binding.Security.Mode=BasicHttpSecurityMode.Message;
CustomBinding cb=new CustomBinding(binding);
BindingElementCollection bec=cb.CreateBindingElements();
You need to prevent the custom binding from making a persistent connection to the service endpoint.
Which code segment should you use?
A. cb.SendTimeout=TimeSpan.Zero;
B. binding.ReceiveTimeout=TimeSpan.Zero;
C. foreach (BindingElement bindingElement in bec)
{
HttpTransportBindingElement element=
(HttpTransportBindingElement) bindingElement;
element.KeepAliveEnabled=false;
}
D. foreach (BindingElement be in bec)
{
if (be is HttpTransportBindingElement)
{
HttpTransportBindingElement httpElement=
(HttpTransportBindingElement)be;
httpElement.KeepAliveEnabled=false;
}
}
Answer: D

Microsoft braindump   070-503-Csharp   070-503-Csharp   070-503-Csharp test answers
18. You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
The service will receive notification messages from client applications by using a number of transports,
including HTTP, TCP, MSMQ, and others.
You need to ensure that all client applications can send notification messages to the service.
Which service contract should you use?
A. [ServiceContract]
public interface INotificationService {
[OperationContract(AsyncPattern=true)]
void LogMessage(string message);
}
B. [ServiceContract]
public interface INotificationService {
[OperationContract(ReplyAction="none")]
void LogMessage(string message);
}
C. [ServiceContract]
public interface INotificationService {
[OperationContract(IsOneWay=true)]
void LogMessage(string message);
}
D. [ServiceContract]
public interface INotificationService {
[OperationContract(IsTerminating=true)]
void LogMessage(string message);
}
Answer: C

Microsoft   070-503-Csharp test   070-503-Csharp
19. You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The service will be hosted in a Console application.
You need to configure the service by using a configuration file other than the default app.config file.
Which code segment should you use?
A. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected override void InitializeRuntime()
{
//Load configuration here
}
}
B. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected override void ApplyConfiguration()
{
//Load configuration here
}
}
C. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected new void InitializeDescription(Type serviceType,
UriSchemeKeyedCollection baseAddresses)
{
//Load configuration here.
}
}
D. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected new void AddBaseAddress(Uri baseAddress)
{
//Load configuration here.
}
}
Answer: B

Microsoft   070-503-Csharp pdf   070-503-Csharp test

NO.3 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment.
[ServiceContract]
public interface IMathService
{
[OperationContract]
int AddNumbers(int a, int b);
double AddNumbers(double a, double b);
}
You have not deployed the IMathService service.
You need to expose the AddNumbers (double a, double b) operation to the IMathService service contract.
Which code segment should you use?
A. [OperationContract]
int AddNumbers(int a, int b);
[OperationContract]
double AddNumbers(double a, double b);
B. [OperationContract(Name="AddInt")]
int AddNumbers(int a, int b);
[OperationContract(Name="AddDouble")]
double AddNumbers(double a, double b);
C. [OperationContract(Action="IMathService/AddInt")]
int AddNumbers(int a, int b);
[OperationContract(Action="IMathService/AddDouble")]
double AddNumbers(double a, double b);
D. [OperationContract(Action="AddInt/*")]
int AddNumbers(int a, int b);
[OperationContract(Action="AddDouble/*")]
double AddNumbers(double a, double b);
Answer: B

Microsoft test   070-503-Csharp   070-503-Csharp certification

NO.4 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to programmatically add the following endpoint definition to the service.
http://localhost:8000/ExamService/service
Which code segment should you use?
A. String baseAddress="http: //localhost:8000/ExamService";
BasicHttpBinding binding1=new BasicHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
B. String baseAddress="http: //localhost:8000/ExamService/service";
BasicHttpBinding binding1=new BasicHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
C. String baseAddress="http: //localhost:8000/ExamService";
WsHttpBinding binding1=new WsHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
D. String baseAddress="net.tcp: //localhost:8000/ExamService/service";
NetTcpBinding binding1=new NetTcpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
Answer: B

Microsoft certification   070-503-Csharp   070-503-Csharp   070-503-Csharp

NO.5 You are creating a Windows Communication Foundation (WCF) service by using Microsoft .NET
Framework 3.5.
You configure a binding to enable streaming.
You need to ensure that the client application is able to stream large XML files to the WCF service.
Which operation contract should you create?
A. [OperationContract]
void UploadFile(Stream xmlData);
B. [OperationContract]
void UploadFile(XmlWriter xmlData);
C. [OperationContract]
void UploadFile(StreamWriter xmlData);
D. [OperationContract]
void UploadFile(byte[] xmlData);
Answer: A

Microsoft   070-503-Csharp   070-503-Csharp questions

NO.6 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework

NO.7 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 Uri baseAddress=
02 new Uri ( http://localhost:8000/ExamService );
03 Uri mexAddress=new Uri("");
04 ServiceHost serviceHost=new ServiceHost(typeof(
05 ?ExamService), baseAddress);
06 ServiceMetadataBehavior smb=
07 serviceHost.Description.Behaviors.
08 Find<ServiceMetadataBehavior>();
09 if (smb != null)
10 {
11
12 }
13 else
14 {
15 smb=new ServiceMetadataBehavior();
16 serviceHost.Description.Behaviors.Add(smb);

NO.8 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You write the following code segment.
namespace MyServices
{
[ServiceContract()]
interface IManageOrders
{
...
}
}
The service metadata must be exposed at the relative address named meta.
You need to add an endpoint element to the app.config file of the service host.
Which code fragment should you add?
A. <endpoint address="meta" binding="wsHttpBinding"
contract="IManageOrders" />
B. <endpoint address="meta" binding="wsHttpBinding"
contract="MyServices.IMetadataExchange" />
C. <endpoint address="meta" binding="mexHttpBinding"
contract="IMetadataExchange" />
D. <endpoint address="meta" binding="mexHttpBinding"
contract="MyServices.IManageOrders" />
Answer: C

Microsoft demo   070-503-Csharp original questions   070-503-Csharp exam   070-503-Csharp

NO.9 }

NO.10 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that the service can send data in the following format to the client applications.
<Account Id="">
<Name> </Name>
<Balance Currency=""> </Balance>
</Account>
Which code segment should you use?
A. [Serializable]
public class Account
{
[XmlAttribute]
public string Id;
[XmlElement]
public string Name;
[XmlAttribute]
public string Currency;
[XmlElement]
public double Balance;
}
B. [DataContract]
public class Account
{
[DataMember(Order=0)]
public string Id;
[DataMember(Order=1)]
public string Name;
[DataMember(Order=0)]
public double Balance;
[DataMember(Order=1)]
public string Currency;
}
C. [Serializable]
public class Account
{
[XmlAttribute]
public string Id;
public string Name;
[XmlElement("Balance")]
public BalanceVal Balance;
}
[Serializable]
public class BalanceVal
{
[XmlText]
public double Amount;
[XmlAttribute]
public string Currency;
}
D. [DataContract]
public class Account
{
[DataMember(Order=0)]
public string Id;
[DataMember(Order=1)]
public string Name;
[DataMember(Name="Balance", Order=2)]
public BalanceVal Balance;
}
[DataContract]
public struct BalanceVal
{
[DataMember(Order=0)]
public double Balance;
[DataMember(Order=1)]
public string Currency;
}
Answer: C

Microsoft   070-503-Csharp braindump   070-503-Csharp   070-503-Csharp test answers

NO.11 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. The service will expose a method named DoProcess to the client applications.
You write the following code segment. (Line numbers are included for reference only.)
01 [ServiceContract]
02 public interface IMyService
03 {
04
05 }
You need to ensure that the client applications are not required to obtain results from the DoProcess
method.
Which code segment should you insert at line 04?
A. [OperationContract(IsOneWay=true)]
bool DoProcess();
B. [OperationContract(IsOneWay=true)]
void DoProcess();
C. [OperationContract(AsyncPattern=false)]
bool DoProcess();
D. [OperationContract(AsyncPattern=false)]
void DoProcess();
Answer: B

Microsoft   070-503-Csharp   070-503-Csharp answers real questions

NO.12 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You create the following service contract.
[ServiceContract]
public interface IMath
{
[OperationContract]
int Add(int num1, int num2);
}
You need to add an operation contract to perform the Add operation asynchronously.
Which operation contract should you use?
A. [OperationContract(AsyncPattern=true)]
IAsyncResult BeginAdd(int num1, int num2);
int EndAdd(IAsyncResult res);
B. [OperationContract]
int BeginAdd(int num1, int num2, AsyncCallback cb, object state);
IAsyncResult EndAdd();
C. [OperationContract]
IAsyncResult BeginAdd(int num1, int num2);
[OperationContract]
int EndAdd(IAsyncResult res);
D. [OperationContract(AsyncPattern=true)]
IAsyncResult BeginAdd(int num1, int num2, AsyncCallback cb, object
state);
int EndAdd(IAsyncResult res);
Answer: D

Microsoft test answers   070-503-Csharp questions   070-503-Csharp   070-503-Csharp   070-503-Csharp

NO.13 smb.HttpGetUrl=mexAddress;

NO.14 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET Framework
3.5.
The WCF service contains two operations named ProcessSimpleOrder and ProcessComplexOrder.
You need to expose the ProcessSimpleOrder operation to all the client applications. You also need to
expose the ProcessComplexOrder operation only to specific client applications.
Which code segment should you use?
A. [ServiceContract]
public interface IOrderManager
{
[OperationContract(Action="*")]
void ProcessSimpleOrder();
[OperationContract]
void ProcessComplexOrder();
}
B. [ServiceContract]
public interface IOrderManager
{
[OperationContract(Name="http: //contoso.com/Simple")]
void ProcessSimpleOrder();
[OperationContract(Name="http: //contoso.com/Complex")]
void ProcessComplexOrder();
}
C. [ServiceContract]
public interface ISimpleOrderManager
{
[OperationContract]
void ProcessSimpleOrder();
}
[ServiceContract]
public interface IComplexOrderManager: ISimpleOrderManager
{
[OperationContract]
void ProcessComplexOrder();
}
D. [ServiceContract]
public interface ISimpleOrderManager
{
[OperationContract(Name="http: //contoso.com/Simple")]
void ProcessSimpleOrder();
}
public interface IComplexOrderManager: ISimpleOrderManager
{
[OperationContract(Name="http: //contoso.com/Complex")]
void ProcessComplexOrder();
}
Answer: C

Microsoft   070-503-Csharp   070-503-Csharp   070-503-Csharp

NO.15 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that data sent in a SOAP header is in the following XML format.
<Data>
<string>String 1</string>
<string>String 2</string>
<string>String 3</string>
</Data>
Which code segment should you use?
A. [MessageContract]
public class MyMessage
{
[MessageHeader]
public string[] Data;
}
B. [MessageContract]
public class MyMessage
{
[MessageHeaderArray]
public string[] Data;
}
C. [MessageContract]
public class MyMessage
{
[MessageProperty]
public string[] Data;
}
D. [MessageContract]
public class MyMessage
{
[MessageBodyMember (Order=0)]
public string[] Data;
}
Answer: A

Microsoft exam simulations   070-503-Csharp test questions   070-503-Csharp test answers   070-503-Csharp   070-503-Csharp

NO.16 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET Framework
3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 public interface IMyService
02 {
03
04 string ProcessString(string name);
05 }
You create a host for the WCF service. You also create a service endpoint at http://localhost:8080/service.
You add an instance of the HttpTransferEndPointBehavior class to the host.
You need to ensure that the ProcessString method can be invoked from a Web browser by using the URL
http://localhost:8080/service/process name=value
Which code segment should you insert at line 03?
A. [OperationContract(Name="process", Action="Get")]
B. [OperationContract(Name="process", Action="Post")]
C. [OperationContract]
[WebGet(UriTemplate = "process name={name}")]
D. [OperationContract]
[WebInvoke(UriTemplate = "process name={name}")]
Answer: C

Microsoft braindump   070-503-Csharp test   070-503-Csharp original questions   070-503-Csharp   070-503-Csharp test

NO.17 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
The service contains the following code segment.
[DataContract]
public class Person
{
}
[DataContract]
public class Customer : Person
{
}
You need to create a service contract that meets the following requirements:
ø The service contract must have an operation contract named GetPerson that returns an object of type
Person.
ø The GetPerson operation must be able to return an object of type Customer.
Which code segment should you use?
A. [ServiceContract]
[ServiceKnownType("GetPerson")]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
B. [ServiceContract]
public interface IMyService
{
[OperationContract]
[ServiceKnownType("Customer")]
Person GetPerson();
}
C. [ServiceContract]
[ServiceKnownType(typeof(Customer))]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
D. [ServiceContract]
[ServiceKnownType("GetPerson",typeof(Customer))]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
Answer: C

Microsoft exam prep   070-503-Csharp   070-503-Csharp exam simulations   070-503-Csharp dumps

NO.18 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You create the following service contract. (Line numbers are included for reference only.)
01 [ServiceContract]
02 public interface IMyService
03 {
04 [OperationContract]
05
06 List<string> GetData(int index);
07 }
You need to ensure that the GetData operation can be accessed by using the URI in the following
manner:
ø GetData/1 for the index value 1
ø GetData/2 for the index value 2
ø .
ø .
ø GetData/n for the index value n
Which code segment should you insert at line 05?
A. [WebGet(UriTemplate="GetData/{index}",
?BodyStyle=WebMessageBodyStyle.Bare)]
B. [WebGet(UriTemplate="GetData index={index}",
?BodyStyle=WebMessageBodyStyle.Bare)]
C. [WebGet(UriTemplate="GetData/[index]",
?BodyStyle=WebMessageBodyStyle.Bare)]
D. [WebGet[UriTemplate="GetData index={index}",
?BodyStyle=WebMessageBodyStyle.Bare]]
Answer: A

Microsoft   070-503-Csharp test answers   070-503-Csharp test   070-503-Csharp exam dumps   070-503-Csharp exam   070-503-Csharp exam

NO.19 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 [ServiceContract(SessionMode=SessionMode.Required)]
02 public interface IOrderManager
03 {
04
05 void CloseOrder();
06 }
You need to decorate the operation as the method that closes the current session.
Which code segment should you insert at line 04?
A. [OperationContract(IsInitiating=false)]
B. [OperationContract(IsTerminating=true)]
C. [OperationContract]
[OperationBehavior(ReleaseInstanceMode=
ReleaseInstanceMode.AfterCall)]
D. [OperationContract(IsTerminating=false)]
[OperationBehavior(ReleaseInstanceMode=
ReleaseInstanceMode.AfterCall)]
Answer: B

Microsoft   070-503-Csharp   070-503-Csharp

NO.20 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. The service will be hosted in a managed Console application.
You want to add endpoints to the service.
You need to ensure that all endpoints use the same base address.
Which code fragment should you use?
A. [ServiceContract]
public interface IMortgageService { ­
public class MortgageService : IMortgageService { ­
Uri baseAddress=new Uri("http: //localhost:8888/MortgageService");
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] {baseAddress });
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), "");
serviceHost.Open();
B. [ServiceContract]
public interface IMortgageService { ­
public class MortgageService : IMortgageService { ­
Uri baseAddress=new Uri("http: //localhost:8888/MortgageService");
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] {});
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), baseAddress);
serviceHost.Open();
C. [ServiceContract]
public interface IMortgageService { ­
public class MortgageService : IMortgageService { ­
string baseAddress="http: //localhost:8888/MortgageService";
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] { });
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), baseAddress);
serviceHost.Open();
D. [ServiceContract(Namespace="http: //localhost:8888/MortgageService")]
public interface IMortgageService { ­
public class MortgageService : IMortgageService { ­
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] { });
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), "");
serviceHost.Open();
Answer: A

Microsoft exam simulations   070-503-Csharp   070-503-Csharp   070-503-Csharp dumps

ITCertKing offer the latest BCP-340 exam material and high-quality 644-068 pdf questions & answers. Our 000-588 VCE testing engine and HP0-S33 study guide can help you pass the real exam. High-quality MB6-870 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/070-503-Csharp_exam.html