Juniper JN0-694 the latest certification exam training materials

JN0-694 is an Juniper certification exam, so JN0-694 is the first step to set foot on the road of Juniper certification. JN0-694 certification exam become more and more fiery and more and more people participate in JN0-694 exam, but passing rate of JN0-694 certification exam is not very high.When you select JN0-694 exam, do you want to choose an exam training courses?

ITCertKing's expert team use their experience and knowledge to study the examinations of past years and finally have developed the best training materials about Juniper certification JN0-694 exam. Our Juniper certification JN0-694 exam training materials are very popular among customers and this is the result ofITCertKing's expert team industrious labor. The simulation test and the answer of their research have a high quality and have 95% similarity with the true examination questions. ITCertKing is well worthful for you to rely on. If you use ITCertKing's training tool, you can 100% pass your first time to attend Juniper certification JN0-694 exam.

ITCertKing is a website which can give much convenience and meet the needs and achieve dreams for many people participating IT certification exams. If you are still worrying about passing some IT certification exams, please choose ITCertKing to help you. ITCertKing can make you feel at ease, because we have a lot of IT certification exam related training materials with high quality, coverage of the outline and pertinence, too, which will bring you a lot of help. You won't regret to choose ITCertKing, it can help you build your dream career.

Exam Code: JN0-694
Exam Name: Juniper (Enterprise Routing and Switching Support, Professional (JNCSP-ENT))
One year free update, No help, Full refund!
Total Q&A: 36 Questions and Answers
Last Update: 2014-02-14

If you are going to take Juniper JN0-694 certification exam, it is essential to use JN0-694 training materials. If you are looking for reference materials without a clue, stop！If you don't know what materials you should use, you can try ITCertKing Juniper JN0-694 exam dumps. The hit rate of the dumps is very high, which guarantees you can pass your exam with ease at the first attempt. ITCertKing Juniper JN0-694 practice test dumps can determine accurately the scope of the examination compared with other exam materials, which can help you improve efficiency of study and help you well prepare for JN0-694 exam.

JN0-694 Free Demo Download: http://www.itcertking.com/JN0-694_exam.html

NO.1 Two neighboring routers are able to form an OSPF adjacency, but are not able to establish an
IBGP neighborship.
What are two reasons for the IBGP neighborship problem? (Choose two.)
A. One of the devices has a misconfigured BGP peer address.
B. One or both of the connected interfaces are missing the family iso statement.
C. OSPF has a lower route preference than BGP .
D. A firewall filter on one of the interfaces is blocking TCP traffic.
Answer: B,C

Juniper   JN0-694   JN0-694 exam dumps   JN0-694 test questions   JN0-694 certification

NO.2 Your Layer 2 network uses VLAN IDs 100 through 400 and you are required to load-balance
these VLANs between two different root bridges. You are currently using the default RSTP settings
and notice that all VLANs are using the same root bridge.
How do you ensure the VLANs are load-balanced between two root bridges?
A. Configure MSTP with two MSTI regions and split the VLAN range between them.
B. Configure VSTP with two VLAN groups and split the VLAN range between them.
C. Configure two RSTP instances and split the VLAN range between them.
D. Configure STP and RSTP and split the VLAN range between them.
Answer: A

Juniper   JN0-694   JN0-694 questions   JN0-694   JN0-694   JN0-694 answers real questions

NO.3 Your Junos device is dropping certain traffic flows, while allowing other traffic flows to pass
through the device unaffected.
Which CoS component is causing this problem?
A. BA classification
B. RED
C. MF classification
D. Rewrite rules
Answer: D

Juniper study guide   JN0-694 dumps   JN0-694   JN0-694 exam prep

NO.4 You are troubleshooting a problem where an OSPF adjacency between two neighboring
routers will not form.
What are two reasons for this problem? (Choose two.)
A. One or both of the connected interfaces are missing the family inet statement.
B. One or both of the connected interfaces are missing the family iso statement.
C. The connected interfaces are not on the same subnet.
D. Another IGP is running on one or both of the routers, overriding OSPF.
Answer: B,D

Juniper pdf   JN0-694 exam prep   JN0-694   JN0-694 original questions

NO.5 Your switch is experiencing a problem where a port that should have only one host connected
occasionally shows that multiple MAC addresses are being learned.
Which configuration setting would ensure that no extra hosts can join the network using this switch
port?
A. mac-limit
B. no-mac-learning
C. persistent-learning
D. bpdu-block-on-edge
Answer: D

Juniper test questions   JN0-694   JN0-694 certification   JN0-694

NO.6 You are having problems redistributing RIP routes into OSPF. Your Junos device has the
following configuration:
[edit protocols ospf]
user@router# show
import my-policy;
area 0.0.0.0 {
interface ge-0/ 0/ 0.0;
interface ge-0/ 0/ ;
interface ge-0/ 0/ {
passive;
}
}
What would resolve the problem?
A. Apply my-policy as an export policy under the [edit protocols rip] hierarchy.
B. Apply my-policy as an import policy under the [edit protocols rip] hierarchy.
C. Apply my-policy as an export policy under the [edit protocols ospf] hierarchy.
D. Use the area-range parameter instead of a routing policy.
Answer: D

Juniper exam simulations   JN0-694 original questions   JN0-694   JN0-694   JN0-694

NO.7 You observe that a router is using an unusually high amount of CPU cycles.
You determine that continuous SPF calculations in OSPF are being performed.
What are two reasons for this problem? (Choose two.)
A. The wrong authentication keys between the OSPF neighbors are used.
B. The interface MTU is mismatched between the OSPF neighbors.
C. There are duplicate router IDs within the OSPF area.
D. An OSPF adjacency is flapping.
Answer: C,D

Juniper   JN0-694 dumps   JN0-694 answers real questions

NO.8 You are implementing Q-in-Q tunneling on an EX Series switch. You want the tunnel to support
all C-VLANs; however, only some VLANs are able to send traffic across the tunnel.
Switch-1 has the following configuration:
[edit vlans]
user@Switch-1# show
v100 {
vlan-id 100;
interface {
ge-0/ 0/ 0.10;
ge-0/ 0/1.20;
}
dot1q-tunneling {
customer-vlans [ ];
}
}
What would solve this problem?
A. Add family ethernet-switching to the tunnel-side interface on Switch-1.
B. Implement RSTP .
C. Q-in-Q tunneling will not work in this scenario; use a Layer 2 VPN instead.
D. Remove the customer-vlans statement.
Answer: C

Juniper original questions   JN0-694   JN0-694   JN0-694   JN0-694   JN0-694

ITCertKing offer the latest C-HANATEC131 exam material and high-quality 642-447 pdf questions & answers. Our 000-593 VCE testing engine and HP0-J66 study guide can help you pass the real exam. High-quality 1z0-599 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-694_exam.html